TAVANCONTROL INNOVATORS Company designs and engineers Electrical Heat Tracing systems related to oil, gas, petrochemical, power plant projects and other applications, completely locally, by its experienced technical experts through technical study of project documents and specifications declared by esteemed employers.The design of the required drawings will estimate the required items (such as heat tracing cables and required peripheral equipment) from A to Z, in compliance with the project specifications and relevant standards. In this section, the items that are carried out in design and engineering are briefly mentioned:

Heat tracing systems are designed based on the following standards:


- IEC60512-10
- IEC62395
- IEC60079-30
- IEE515
Things to consider when designing heat tracing systems:
- The type of environment in which the heat tracing equipment is used:
. Safe Area
. Hazardous Area

- Select the type of system operation based on the project's maintenance temperature:


. Ambient or Anti-Freeze
. Process Temperature
. Select the type of heat tracing cable based on the above and the project's specifications and requirements:
. Design Temperature
. Maintenance Temperature
. Minimum Ambient Temperature

- Select the type of system operation based on the project's maintenance temperature:


. Ambient or Anti-Freeze
. Process Temperature
. Select the type of heat tracing cable based on the above and the project's specifications and requirements:
. Design Temperature
. Maintenance Temperature
. Minimum Ambient Temperature

Estimating and preparing a list of items required for the heat tracing project, such as:


- Specifying the type and power of the cable required and the area of ​​each type of cable.
- The number of items required for installing the heat tracing cable based on the type of cable selected

(Termination kit, End seal, Glass and Aluminum Tapes,…)
- Select the type and number of thermostats required according to the system performance.
- Select the type and number of Junction Boxes required based on the number of inputs required and select the type of gland based on the type of power cable.
- Select the type and number of panels required according to the designed drawings and the required specifications of the project.