
1 Bus wire | Nickel plated copper, 1.23 mm² |
2 Self-regulating heating element 3 Insulation | Fluoropolymer |
4 Protection. | Protective braid (Cu, tin plated) |
5 Outer jacket | Fluoropolymer |
Chemistry and Petrachemistry > Oil and Gas Industry > Power plants > Water and sanitation utilities |
Benefits > Seven nominal outputs > Moisture proof > Resistant to chemicals > Use in hazardous areas |
Design |
Protective braid Fluoropolymer outer jacket |
Fronze prevention
Fronze prevention
Fronze prevention
Checklist ELSR-H |
EL-BCSH-EX Ex-Con-SR | Silicone termination cap, red, glued, with ex marking Ex connection sleeve 36 x 210 mm 4 | CX81EH2 OX81125 |
ELVB-SREX-25 | Power connection, glued, Gland M25 x 1.5. РЕ Бх в | 0X81FA1 |
ELVB-SREX-IT | Power connection, glued, without gland | OSTAITI |
ELVB-SRAH-EX-20 | Power connection, glued, Gland M20, brass | 0X81 PHD |
ELVB-SRV-H | Connection set, shrinie fit | 0911117 |
ELVB-SRA-25 | Power connection, glued. Gland M25 x 15, PE | 0914040 |
Junction Boxes | ||
FLAK-Ex-2:00 | 110 x 75 x 57 mm, polyester, IP66, 1 Trace heater, 1 Power cable | OX85200 |
ELAK-EX-4:01 | 122 x 120 x 90 mm, polyester, 1966, 1-3 Trace heaters, 1 Power cable | OX85401 |
ELAK-5 | 122 x 120 x 90 mm, polyester, 3 breakouts M25, IP 66 | 0920013 |
Exit R | 150 x 125 mm, 3 Trace heaters, 1.P1100, incl. maunting stand | 0X80070 |
Power Connection & End Termination |
Trace Heater classification 26 Ex 60079-30-1 TC Gb 20 Ex60079-30-1CDb > System classification 2G Ex 60079-30-1 eb ICT3 Gb 11-20 Ex 60079-30-1 15 IIIC 1200°C D > Certification IECEX EPS 12.0004 J IECEX EPS 19:0006 X EPS 12 ATEX 1429 EPS 9 ATEX 1013 X CML 21 UKEX 3806 CML 21 UKEX 3905 X > Temperature class 13 |
>Use in Ex areas is permitted up to 180 °C
Technical Information
Max. continuous exposure temperature (power on)
Max. intermittent exposure temperature (de-energized)
Nominal voltage
Min. Bending radius
-60°C
Switch on temperature [PC] | Nominal fuse rating [A] | Heating circuit length [m] | ||||||
ELSR-H- 10-2-BOT | ELSR-H- 15-2-BOT | ELSR-H- 30-2-BOT | ELSR-H- 45-2-BOT | ELSR-H- 60-2-BOT | ELSR-H- 75-BOT | |||
| '6 | 1930 | 158.0 | 1220 | 82.0 | 55.0 | 41.0 | 33.0 |
10 | 26 | 1930 | 158.0 | 1360 | 1020 | 68.0 | 510 | 410 |
25 | 1930 | 58.0 | 136.0 | 1110 | 85.0 | 64.0 | 510 | |
| 32 | 1930 | 158.0 | 1360 | 1110 | 91.0 | 79.0 | 66.0 |
| 16 | 189.0 | 153.0 | 1160 | 770 | 52.0 | 39:0 | 30.0 |
0 | 20 | 1890 | 153.0 | 132.0 | 970 | 65.0 | 49.0 | 37.0 |
25 | 189.0 | 153.0 | 1320 | 1080 | 81,0 | 61.0 | 470 | |
| 32 | 1890 | 153.0 | 1320 | 1080 | 88,0 | 770 | 60.0 |
| 16 | 1840 | 1460 | 1100 | 73.0 | 50.0 | 37,0 | 28.0 |
-10 | 20 | 184.0 | 1480 | 129.0 | 920 | 62.0 | 46.0 | 35.0 |
25 | 184.0 | 48,0 | 129.0 | 105.0 | 77.0 | 580 | 440 | |
| 32 | 1840 | $48.0 | 129.0 | 105.0 | 86,0 | 70.0 | 57.0 |
| 16 | 180.0 | 139.0 | 104.0 | 700 | 47.0 | 36.0 | 26.0 |
-20 | 20 | 180.0 | 145.0 | 125.0 | 870 | 59.0 | 440 | 33.0 |
25 | 180.0 | 45.0 | 1250 | 103.0 | 24.0 | 56.0 | 410 | |
| 32 | 180.0 | 145:0 | 125.0 | 103.0 | 84.0 | 670 | 53:0 |
| 16 | 1730 | 26.0 | 95.0 | 640 | 43,0 | 33.0 | 23,0 |
| 20 | 1730 | 1380 | 1190 | 80.0 | 54.0 | 410 | 29.0 |
-40 | 25 | 173.0 | 138:0 | 120.0 | 980 | 68.0 | 51.0 | 36:0 |
| 32 | 173.0 | 138,0 | 120.0 | 98.0 | 81,0 | 61.0 | 46.0 |
*Heating circuit lengths on the following conditions >230 V nominal voltage > Delayed action circuit breakers (C-characteristic) with 80% max, load >Maximum 10% line voltage drop on heating caon bus wire |
> Power connection to one nearer end
Ordering Information
Type | Nominal output (at 10°C | approx [mm] | Weight approx. [g٫m] | Article No |
ELSR-H-10-2-BOT | 10W٫m | 24x50 | 120 80221103 | 120 80221103 |
ELSR-11-15-2-BOT | 15 W٫m | 124x50 | 120 80221153 | 120 80221153 |
ELSR-H-20-2-BOT | 20 W٫m | 12.4x5.0 | 120 | 80221203 |
ELSR-H-30-2-BOT | 30 W٫m | 12.4 x 5.0 | 120 | 80221303 |
ELSR-1H-45-2-BOT | 45 W٫m | 124x50 | 120 | 80221453 |
ELSR-H-60-2-BOT | 60 W٫th | 124x50 | 120 | 80221603 |
ELSR-N-75-2-BOT | 75 W٫m | 12.4 x 5.0 | $20 | 80221753 |
